<acronym id="gpyqx"><kbd id="gpyqx"><menu id="gpyqx"></menu></kbd></acronym>

  • <button id="gpyqx"></button>

    1. <dd id="gpyqx"><pre id="gpyqx"></pre></dd>
        1. 兼容光模塊

          標準協議光模塊

          兼容協議光模塊

          其它種類光器件

          技術支持

          安華高 Embedded光模塊

          安華高 Embedded光模塊

          The AFBR-77D4SZ and AFBR-78D4SZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

          The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM LightTurn connector.

          安華高Avago SFP光模塊

          AFBR-57F5xMZ

           AFBR-57F5xMZ
                      The Avago AFBR-57F5xMZ is an optical transceiver module that supports high speed serial links over multi-mode optical fiber at signaling rates up to 14.025 Gb/s (the serial line rate of 16GFC). The product is compliant with Small Form Pluggable industry agreements SFP and SFP+ for mechanical and low speed electrical specifications. High speed electrical and optical specifications are compliant with ANSI Fibre Channel FC-PI-5.

          FT AFBR-79EBPZ

          AFBR-79EBPZ

          AFBR-79EBPZ

          40G Bidirectional MMF QSFP+ Transceiver ModuleThe Avago AFBR-79EBPZ is a 40 Gigabit Ethernet (40G) bidirectional (BiDi) multimode fiber (MMF) QSFP+ transceiver module designed for high-speed data center interconnect and enterprise networking applications. Based on proprietary 2x20G BiDi optics, the module enables four Tx and four Rx 10G electrical data lanes to transmit over a 2-fiber LC duplex cable, providing a cost-effective upgrade path from 10G to 40G Ethernet leveraging existing 10G MMF cabling infrastructure.

          The AFBR-79EBPZ supports 40G data transfer over 100 meters of OM3 fiber or 150 meters of OM4 fiber. The module is compliant to
          40G XLPPI electrical specification per IEEE 802.3ba-2010 and QSFP+ SFF-8436 specification.

          AFBR-79EQDZ

          AFBR-79EQDZ

          The Avago Technologies AFBR-79EQDZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet (40GbE) application. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules supports 4 x 10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4 x 5G IB dual data rate (20G-IBDDR) and 4 x 2.5G IB single data rate (10G-IB-SDR) applications as well.

          FT  AFBR-821VxyZ

          AFBR-821VxyZ

          AFBR-821VxyZ
           
                 The AFBR-821VxyZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver fiber optic modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
           The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn  connector.

          AFCT-5710ALZ

           AFCT-5710ALZ 

                    The  AFCT-5710ALZ  family of Small Form Factor Pluggable (SFP) LC optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

          The  AFCT-5710ALZ  family targets applications requiring DMI, while the   AFCT-5710ALZ  family is streamlined for those applications where DMI is not needed.

           

          FT AFCT-5710Z

          AFCT-5710Z

          AFCT-5710Z

                    The AFCT-5710Z family of Small Form Factor Pluggable (SFP) LC optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

          The AFCT-5710Z family targets applications requiring DMI, while the AFCT-5710Z family is streamlined for those applications where DMI is not needed.

           FT AFCT-575xZ

          AFCT-575xZ

           AFCT-575xZ

                The Avago  AFCT-575xZ  family of SFP optical transceivers for OC12/STM-4 offers many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.The  AFCT-575xZ family targets applications requiring DMI features, and the  AFCT-575xZ  family is streamlined for those applications where DMI features are not needed.

          FT  AFCT-5765NLZ

          AFCT-5765NLZ

           AFCT-5765NLZ

                 The Avago AFCT-5765NLZ family of SFP optical transceivers for OC3 applications offer many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch. The  AFCT-5765NLZ family targets applications requiring DMI features, and the  AFCT-5765NLZ family is streamlined for those applications where DMI features are not needed.

          FT  AFCT-89WDDZ

          AFCT-89WDDZ

          AFCT-89WDDZ

          The Avago Technologies AFCT-89WDDZ is a Four-Channel duplex, Pluggable, single mode Fiber-Optic QSFP28 Transceiver for 100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range, single mode fiber interconnect applications. It integrates four electrical data lanes in each direction into transmission over a duplex LC single mode fiber optic cable. Each electrical lane operates at 25.78125 GBd and conforms to the 100GE CAUI-4 electrical interface.

          FT  AFCT-89WDDZ

          AFCT-89WDDZ

           AFCT-89WDDZ

                      The Avago Technologies AFCT-89WDDZ is a Four-Channel duplex, Pluggable, single mode Fiber-Optic QSFP28 Transceiver for 100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range, single mode fiber interconnect applications. It integrates four electrical data lanes in each direction into transmission over a duplex LC single mode fiber optic cable. Each electrical lane operates at 25.78125 GBd and conforms to the 100GE CAUI-4 electrical interface.

           Per channel transmitter and receiver retimers, configured for 4x25G operation, can be bypassed to enable reduced power or alternative data rate transmission.
           Link distances up to 2km using SMF optical fiber are supported. These modules are designed to operate over single mode fiber systems using four coarse WDM wavelengths nominally at 1271nm, 1291nm, 1311nm and 1331nm. The electrical interface uses a 38 contact QSFP28 edge type connector. The optical interface uses a conventional LC duplex optical connector. This module incorporates Avago Technologies proven integrated circuit and DFB technology to provide reliable long life, high performance, and consistent service.

           FT HFBR-53A5VEMZ

          HFBR-53A5VEMZ

           HFBR-53A5VEMZ 

                   The HFBR-53A5VEMZ optical transceivers from Avago Technologies allow the system designer to implement a range of solutions for multimode Gigabit Ethernet applications.

          The overall Avago optical transceiver product consists of three sections: the transmitter and receiver optical subassemblies, an electrical subassembly, and the package housing which incorporates a duplex SC connector receptacle.

          ABCU-57xxxxZ

          ABCU-57xxxxZ 

                The ABCU-57xxxxZ family of electrical transceivers from Avago Technologies offer full-duplex throughput of 1000 Mbps by transporting data over shielded and unshielded twisted pair category 5 cable with 5-level PAM (Pulse Amplitude Modulation) signals.The Avago Technologies 1000BASE-T module takes signals from both the twisted pair category 5 cable and the SerDesinterface. Pin count overhead between the MAC and the PHY is minimized, and Gigabit Ethernet operation is achieved with maximum space savings.

          FT  AFBR-570xZ

          AFBR-570xZ

          AFBR-570xZ 
                The AFBR-570xZ family of SFP optical transceivers offers the customer a wide range of design options, including optional DMI features (further described later), two temperature ranges (extended or industrial), and choice of standard or bail delatch. The AFBR-5705Z family targets those applications requiring DMI features. The AFBR-5701Z family is a streamlined product designed for those applications where DMI features are not needed.

          FT AFBR-5710LZ

          AFBR-5710LZ

          AFBR-5710LZ 

                   The Avago AFBR-5710LZ family of gigabit ethernet SFP optical transceivers offers the customer a wide range of design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

          FT  AFBR-5710Z

          AFBR-5710Z

           AFBR-5710Z

                 The Avago  AFBR-5710Z  family of SFP optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges, and choice of standard or bail delatch.The  AFBR-5710Z family targets those applications requiring DMI features. The  AFBR-5710Z  family is a streamlined product designed for those applications where DMI features are not needed.

          [12 3 4 5  >>  

          Search

          久久精品国产字幕高潮,亚洲精品无码专区中文字幕,国产在视频精品线观看,高辣H公主花液张开腿